Panasonic NV-HD100A - Page 15

2
Rotate Shuttle Ring.
PAUSE/
STILL
C;)
Backward
Backward
Forward
PAUSE/
STILL
11 
REW
41/8
FF
E3/10*
Playback
Other Playback Functions
To change the playback speed
Using Shuttle Ring:
1
Press
PAUSE/STILL.
Using Remote Controller:
1
Press SEARCH.
2
Press + or — repeatedly.
+: To increase the playback speed forward.
—: To increase the playback speed backward.
SEARCH
To locate the desired picture exactly
1
Press PAUSE/STILL.
2
Turn Jog Dial.
To obtain high speed picture during fast
forward or rewind
Keep
FF
pressed during fast forward.
Keep
REW
pressed during rewind.
•
REW/O
•
The same operation can also be performed by turning the
Shuttle Ring.
To skip scene
Press
SKIP
during playback.
SKIP
0
*The following 30 seconds will be skipped.
•
Each press gives a 30 seconds time span up to 4 minutes.
To return to a specified scene
1 Press
RESET
to set the counter to 0:00.00.
2
After playback, press
ZERO STOP
in the stop mode.
RESET 
ZERO STOP
•
The tape will be rewound or fast forwarded to 0:00.00.
To playback a recorded part repeatedly
Press REPEAT
in the stop mode or during playback.
REPEAT 
Beginning

End of
of Tape 
Recorded Part
I  I 
1  I 
I  I 
I  I 
I 
I
Repeat Playback
PLAY

Control Signal Interruption
(at least 5 sec.)
REW
To find the beginning of each recording
For example:
Searching for the 2nd recorded segment in the forward
direction.
Press INDEX 
twice.
*After finding the specific recorded segment, playback
starts automatically.
*For the reverse direction, press
INDEX 144 .
•
Up to 20 index signals can be searched for in both
directions.
Recording Index Signals
Index signals are recorded in following cases.
WRITE indicator appears on the Display.
*When a recording is started by pressing
REC.
*When
REC
is pressed during recording.
•
When timer recording is activated.
Note:
*Audio reproduction of linear (conventionally recorded)
tapes will be monaural when played back on the FM Hi-Fi
video recorders.
*Cue, review or slow playback will be automatically
released after 10 minutes, and still playback after
5 minutes.
*The INDEX search function can only work correctly, if the
index signals are spaced at least 3 minutes apart in the
SP mode and 5 minutes apart in the LP mode.
0
INDEX
O 
®
15