Panasonic Omnivision PV-V4640

Multi Function Display
Speed Display
Displays the recording speed.
Clock/ Status/ Channel Display/ Prog
Displays the current time. Briefly displays VCR status when a function button is pressed.
Briefly displays the channel number, or “LINE1” or “LINE2” when a channel or line input is selected.
In demonstration mode, featured items are displayed. (See below.)
VCR Indicator
Lights when the VCR/TV selector is set to
VCR.
Hi-Fi indicator
Lights when Hi-Fi audio is monitored or playback.
Self Demo Mode
After first power on or VCR memory reset (page42), Self Demo mode is started after 5 seconds.
This mode is cancelled when clock is set.
To restart, hold down PLAY on VCR for 5 seconds.
To cancel, hold down PLAY again for 5 seconds.
* This mode is only possible when cassette is not inserted and clock is not set.
Rear View of the VCR
AC Power Plug
While plugged into an AC outlet, the i
VCR consumes 3.3 W of electrical ee Connector (L/R)
power in off condition.
VHF/UHF Antenna
Input Terminal
See pages 4, 14.
Video Input Connector
See page 15.
VHF/UHF Antenna
Output Terminal
See pages 4, 14.
Video Output :
Connector Audio Output Connector (L/R)
See pages 4, 15. See pages 4, 15.
r
O
O
D
>
je]
=
(9
=>
©
O
3
=
e)
0