Panasonic Palmcoder IQ PV-IQ225 - Attaching the Shoulder Strap; Adjust the Length; Hand Strap

Make sure the Battery Pack is not attached.
®
](_) Pinch the tabs together on either side
of the clasps (_) and open the buckles.
Buckle Catch
_ 2Unhook the strap from the Buckle Catch.
Thread the strap ends through the Strap
Attachment Rings. Then re-hook them onto
the Buckle Catch.
Snap both clasps shut to lock the strap in
place.
Pull a loop of the strap loose 1_
.A
from the buckle. _! __
L l
e_
_o 2Pull the strap firmly throughthe buckle
B'f,,_q_.'/_Jr,_em to adjust the length.
• Irt_
Adjust the length to the size of your hand
using the illustration at left as a guide.
18