If you stop recording but plan to resume within 24 hours, use the Edit Standby feature to
make a smooth transition between scenes.
Set the POWER switch to OFF and leave
the cassette in the Palmcorder.
Set the POWER switch to CAMERA and
press RECORD/PAUSE (within 24
hours) to continue recording,
POWER Switch
Note:
• If it is longer than 24 hours before you resume
recording, use the manual Easy Edit feature
described below.
For proper continuity when taping from the Stop mode, or after changing the Battery
Pack.
Set the POWER switch to VCR.
L
® Press REWIND/SEARCH to go
back a few seconds on the tape.
® Press PLAY to review the picture
on the Viewfinder.
(_ Press STILL at the location you
w_sh to continue your recording.
To prepare for recording, set the
POWER switch to CAMERA.
2O
Press RECORD/PAUSE to continue
recording.
To Next Page
Loading...
