EasyManua.ls Logo

Panasonic Palmcoder IQ PV-IQ225 - Focus Control Options

Panasonic Palmcoder IQ PV-IQ225
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The Palmcorder will automatically bring the
subject into focus even during zooming.
Press FOCUS A/M if necessary, so that
the letters "MF" do not appear in the EVF.
_ttl"ttqT_B _ftt'_'_,
Use Manual Focus (MF) when recording ...
a subjectthroughglass.
a scenewherethe subjectisfar fromthe
Palmcorderandthere areobjectsin the
foreground.
a subjectwithdistincthorizontalstripes.
a subjectnotcenteredin theViewfinder.
subjectswithshinysudaces.
an obliquely angled subject.
a bright, fiat subject such as a white wall.
in low light situations,
a scene with fast motions, like a golf swing,
Re-focusing may be required
when your Palmcorder is aimed at a new
scene.
Press FOCUS so that "MF" (Manual
Focus) appears in the EVF. _ 7_____JJ,_:::;;;_l
2Press and hold the "T' _-- (_J_°._ ""_'='_ I
side of the POWER ZOOM _ 6"_
switch until the tens is e,_ =urn the FAR/NEAR dial
zoomed in all the way until the picture is in focus.
(subject at maximum size). Itmay be necessaryto back
away from the subjectto
_#p focus the imageproperly.
ress the "W" side of the
POWER ZOOM switch to
frame the picture as
desired.
Auto Focus will function down to 1/2 inch (12.7mm) in front of the lens,
Press the "W" side of the POWER ZOOM switch to the wide angle position,
Then, bring the Palmcorder as close to the subject as necessary.
26

Table of Contents

Related product manuals