Input menu
ENGLISH -
39
Settings
HDMI
Press ▲▼to select [HDMI] and then press
the <SELECT> button.
Video
Press ▲▼ to select [Video] and then
press the <SELECT> button.
S-video
Press ▲▼ to select [S-video] and then
press the <SELECT> button.
J
Video System Selection
The projector automatically detects an incoming video
system, and adjusts itself to optimize its performance.
Note
When the [Input Search] function is set to [On 1] or
z
[On 2] in the [Auto setup] function, the input signal will be
searched automatically.
The [System] menu cannot be selected when the input is
z
selected to [HDMI], [Video], [S-video] or [RGB(Scart)].
To Next Page
