Panasonic PT-CW230E - Setting Menu: Filter and Factory Defaults; Filter Counter Management; Restoring Factory Default Settings

Setting
ENGLISH -
57
Settings
Filter counter
This function is used to set a frequency for the lter
replacement.
Press ▲▼ to select [Filter counter].1 )
Press ►or the <SELECT> button to 2 )
access the submenu items.
Filter counter
J
Show the total accumulated time of the lter use timer
setting.
Timer
J
To set a timer. When the projector reaches the
selected time the lter warning icon appears on the
screen.
Press ▲▼ to select [Timer] and then 1 )
press the <SELECT> button.
Press ▲▼ to set the Timer.2 )
Select from [Off/2000 H/3000 H/4000 H]
z
depending on the use environment.
Filter counter reset
J
After replacing the lter unit, be sure to reset the timer.
Press ▲▼ to select [Filter counter 1 )
reset].
Press the <SELECT> button. 2 )
[Filter counter Reset?] appears. Select [Yes]
z
to continue. Another conrmation dialog
box appears, select [Yes] to reset the [Filter
counter].
Factory default
This function returns all setting values except for the
[PIN code lock], [Logo PIN code lock], [Lamp runtime]
and [Filter counter] to the factory default settings.
Press ▲▼ to select [Factory default].1 )
Press the <SELECT> button.2 )
[Return to Factory default?] appears. Select
z
[Yes] to continue. Another conrmation dialog
box appears, select [Yes] to return to [Factory
default].