Replacement
ENGLISH -
61
Maintenance
Resetting the Filter Counter
J
Be sure to reset the Filter counter after replacing the air lter unit. (
Æ
page 57"
Filter counter reset
")
Attention
Turn off the power before you replace the air lter unit.
z
When attaching the air lter unit, make sure that the projector is stable, and work in an environment that is
z
safe, even in the event of the air lter unit dropping.
Do not operate the projector with the lter removed. Dust may accumulate on the optical elements degrading
z
picture quality.
Do not put anything into the air ports. Doing so may result in malfunction of the projector.
z
The air lter unit to be replaced should be an unused product.
z
After replacing the air lter, reset the lter counter. Otherwise, the power of the projector may be turned off for
z
safety.
To Next Page
Loading...
