24
Information Acquisition Interval Setting Change
Information Acquisition Interval Setting Change
1. Select Options → Setting on the menu bar (1 in the above diagram).
2. Select the General tab, and enter the desired time (unit: minutes) in the Interval Time text box (2 in the above
diagram).The setting range is from 1 to 9,999 minutes, in 1-minute steps.
* If the Update Interval of Projector Information checkbox is not selected, information will not be updated
automatically.
* If the Check Start Up checkbox is selected, information will be updated at each startup of the software.
3. Click Update to apply the new settings (3 in the above diagram).
1
2
3
To Next Page
Loading...
