Panasonic PT-D10000

31
About Error Log File Contents
 The error log file describes error information in the following format.
Multi Projector Monitoring & Control Software
Version, V.1.0L017
Time, 2008/04/07 13:55:03
Projector Name, Developer, Model Name, Checked Time, Error Status, Self Diagnosis
F100NT-3, Panasonic, F100NT, 2008/03/10 12:54:47, 120000, 0000000000000000
D5700-1, Panasonic, D5700, 2008/03/21 08:11:47, 002000, 0000000000000000
D10000-1, Panasonic, D10000, 2008/03/24 21:31:47, 000200, 00000000000000000000000000000000
FW100NT-2, Panasonic, FW100NT, 2008/04/01 14:01:47, 000010, 0000000000000000
[EOF]
Multi Projector Monitoring & Control Software
Version, V.1.0L017
Time, 2008/04/07 13:55:03
Projector Name, Developer, Model Name, Checked Time, Error Status, Self Diagnosis
F100NT-3, Panasonic, F100NT, 2008/03/10 12:54:47, 120000, 0000000000000000
D5700-1, Panasonic, D5700, 2008/03/21 08:11:47, 002000, 0000000000000000
D10000-1, Panasonic, D10000, 2008/03/24 21:31:47, 000200, 00000000000000000000000000000000
FW100NT-2, Panasonic, FW100NT, 2008/04/01 14:01:47, 000010, 0000000000000000
[EOF]
 The following information is stored.
Projector name
Manufacturer's name
Model name
Time when error generation was confirmed
Error status: Acquired error information (6 digits)
Self-diagnosis information: Self-diagnosis information (16 or 32 digits) that can be obtained by the self-
diagnosis command
 Provide this information when contacting the Service Department.
← Software name
← Version
← Date and time of file storage
← File end indication