Panasonic PT-D10000

8


Projector Network Setting Screen (F100NT, with wired LAN connect
Projector Network Setting Screen (F100NT, with wired LAN connect
ion)
ion)
1. Set NETWORK
STANDBY to ON.
2. Set WEB CONTROL
to ON.
The projector name can
be changed by clicking
Name Change.
Set DHCP to OFF.
Consult your network
administrator for the IP
address, subnet mask and
gateway to enter.
After entering all of the settings,
click OK to apply them.
Select WIRED LAN.
Select
NETWORK.