EasyManua.ls Logo

Panasonic PT-DW100U

Panasonic PT-DW100U
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
ENGLISH
Location and function of each part
Front
Remote control unit
1
Remote control operation indicator lamp
This LED flashes when any button is pressed. If
it doesn’t, check the side Lock switch and the
batteries.
2
POWER STANDBY button ・・・・・・・・・ (pp. 35, 37)
When the projector is operating, use this key to
enter the Standby mode.
3
POWER ON button ・・・・・・・・・・・・・・・・・・・・ (p. 36)
When the projector is in standby mode with the
MAIN POWER switch of the projector at the
“ l ” side, this button switches the projector to
projection mode.
4
Input select (RGB1, RGB2, DVI-D, VIDEO,
S-VIDEO, AUX) button ・・・・・・・・・・・・・・・・・ (p. 46)
These buttons select the RGB1, RGB2, DVI-D,
VIDEO, S-VIDEO and AUX (optional input module)
input ports.
5
MENU button ・・・・・・・・・・・・・・・・・・・・・ (pp. 49, 51)
Use this button to return to the previous screen
when the sub menu is displayed. If you hold it
down for at least 3 seconds while the on-screen
indication is OFF, the OFF state is canceled.
6
Arrow ▲▼◄►buttons ・・・・・・・・・・・・ (pp. 51, 86)
Use these buttons to select menu items,
change settings, adjust levels, and to enter the
“SECURITY” password.
ENTER button ・・・・・・・・・・・・・・・・・・・・・・・・ (p. 51)
Press to activate a menu selection or to initiate a
function.
7
ON SCREEN button ・・・・・・・・・・・・・・・・・・・ (p. 46)
This buttons toggles the display of the onscreen
menus.
8
TEST PATTERN button ・・・・・・・・・・・・・・・・ (p. 47)
Use this button together with the arrow keys to
display the internal test patterns.
9
Numeric (0-9) buttons ・・・・・・・・・・・・・ (pp. 18, 82)
These buttons are used in systems with multiple
projectors to enter projector ID numbers. They
may also be used to enter user-adjustment values
and by service personnel.
j
STATUS button ・・・・・・・・・・・・・・・・・・・・・・・ (p. 46)
Press this button to display projector information.
Also, if you set the network function in advance,
the status of the projector can be sent by e-mail.
k
LIGHT button ・・・・・・・・・・・・・・・・・・・・・・・・・ (p. 47)
Press this button to illuminate the remote control
buttons. The backlight will be extinguished
10 seconds after the last key press.
1
2
3
4
5
6
7
8
9
j
k
l
m
n
o
p
q
r
s

Table of Contents

Related product manuals