66 –
ENGLISH
How to use ADVANCED MENU (continued)
Note
When “FRAME DELAY” is set to “SHORT”, •
deterioration in the picture quality will occur.
Furthermore, the noise reduction function cannot be
used.
Raster position
When the scaler is set such that the image is smaller
than the display area, the image can be moved to any
position inside the display area.
Press ▲▼ to select “RASTER 1.
POSITION”.
EDGE BLENDING
FRAME DELAY
RASTER POSITION
OFF
DEFAULT
Press ENTER.2.
The “RASTER POSITION” screen will be •
displayed.
RASTER POSITION
V
H
0
0
Press ▲▼◄► to adjust the 3.
position.
When 4:3 pictures are displayed
Pressing ► button will move
the image to the right.
Pressing ◄ button will move
the image to the left.
Press MENU three times.4.
The on-screen indications disappear and the •
normal screen appears again.
To Next Page
Loading...
