Panasonic PT-DW100U - Adjusting Brightness; Adjusting the Color; Adjusting Color; Adjusting Tint

ENGLISH – 53
Basic Operation
Press ◄► or ENTER.2.
The “CONTRAST” individual adjustment screen •
will be displayed.
CONTRAST
ADJUST
0
Press ◄► to adjust the level.3.
Operation Adjustment
Adjustment
range
Press ►
button.
Raises the picture
brightness and the
picture becomes clearer.
Maximum value
31
Press ◄
button.
Lowers the picture
brightness and
weakens the picture.
Minimum value
-31
Attention
If you need to adjust the “BRIGHTNESS”, it should •
be adjusted before other adjustments are made.
Adjusting Brightness
Adjusts the brightness (black level) of the picture.
Press ▲▼ to select 1.
“BRIGHTNESS”.
CONTRAST
BRIGHTNESS
COLOR
0
0
0
Press ◄► or ENTER.2.
The “BRIGHTNESS” individual adjustment •
screen will be displayed.
BRIGHTNESS
ADJUST
0
Press ◄► to adjust the level.3.
Operation Adjustment
Adjustment
range
Press ►
button.
Increases the
brightness of the dark
(black) parts of the
screen.
Maximum value
31
Press ◄
button.
Reduces the brightness
of the dark (black) parts
of the screen.
Minimum value
-31
Adjusting Color
This adjusts the depth of the colors.
Press ▲▼ to select “COLOR”.1.
BRIGHTNESS
COLOR
TINT
0
0
0
Press ◄► or ENTER.2.
The “COLOR” individual adjustment screen will •
be displayed.
COLOR
ADJUST
0
Press ◄► to adjust the level.3.
Operation Adjustment
Adjustment
range
Press ►
button.
Deepens colors.
Maximum value
50
Press ◄
button.
Weakens colors.
Minimum value
-50
Adjusting Tint
This adjusts skin tones in the pictures.
Press ▲▼ to select “TINT”.1.
COLOR
TINT
COLOR TEMPERATURE
0
0
DEFAULT
Press ◄► or ENTER.2.
The “TINT” individual adjustment screen will be •
displayed.
TINT
ADJUST
0
Press ◄► to adjust the level.3.
Operation Adjustment
Adjustment
range
Press ►
button.
Adjusts skin tone
toward reddish-purple.
Maximum value
31
Press ◄
button.
Adjusts skin tone
toward greenish color.
Minimum value
-31
Adjusting the color
temperature
Used to set the projector’s white point. Three presets
and two user-definable modes are available. A
colorimeter should be used if available.
Carry out this adjustment while the signals to be •
adjusted are being projected.
Press ▲▼ to select “COLOR 1.
TEMPERATURE”.
TINT
COLOR TEMPERATURE
GAMMA
0
DEFAULT
DEFAULT
Press ◄► or ENTER.2.
The “COLOR TEMPERATURE” individual •
adjustment screen will be displayed.
COLOR TEMPERATURE
CHANGE
DEFAULT