Panasonic PT-DZ6700E

5.2. Control through LAN
Connection and the method of command transmission are different according to the mode (the setting of Admin password on WEB
CONTROL). Control according to the procedure in 5.2.1. on the protection mode (the password is set), and according to the
procedure in 5.2.2. on the unprotected mode (the password is not set).
Refer to 5.3. "Control Commands" for control commands because it is common in the case of Control through Serial terminal
(SERIAL).
5.2.1. When WEB CONTROL Admin Password is set (Protection Mode)
5.2.1.1. Connection
1. Access IP address and the port number (default = 1024) of the projector, then connect to the projector with them.
IP address and the port number can be accessed from the menu of the projector.
· IP address: MAIN MENU → NETWORK → NETWORK STATUS
· Port number: MAIN MENU → NETWORK → NETWORK CONTROL → COMMAND PORT
2. Receive a response message.
Response Message
Data section Space Mode Space Random characters End character
"NTCONTROL"
(ASCII character string)
´´
0x20
´1´
0x31
´´
0x20
"zzzzzzzz"
(Hexadecimal ASCII code)
(CR)
0x0d
9bytes 1byte 1byte 1byte 8bytes 1byte
Mode: 1 = Protection mode
3. Generate 32 bytes hash value (message digest) from the following data by using the MD5 (Message Digest Algorithm 5).
"xxxxxx:yyyyy:zzzzzzzz"
· xxxxxx: Administrator authority user-name on WEB CONTROL [default = "admin1"]
· yyyyy: Password corresponding to above-mentioned user-name (admin1) [default = "panasonic"]
· zzzzzzzz: 8 bytes random characters obtained from the response message
· (colon): Separator
5.2.1.2. Method of Command Transmission
Transmits command by the following format.
Transmission Data
Header Data section End character
Hash value
(Refer to the step 3 in
5.2.1.1.)
´0´
0x30
´0´
0x30
Control command
(ASCII character string)
(CR)
0x0d
32 bytes 1byte 1byte Undefined length 1byte
Reception Data
Header Data section End character
´0´
0x30
´0´
0x30
Control command
(ASCII character string)
(CR)
0x0d
1byte 1byte Undefined length 1byte
Error Response
Error Message End character
"ERR1" Command format error (CR) 0x0d
"ERR2" Out of parameter (CR) 0x0d
"ERR3" Busy or unavailable time (CR) 0x0d
"ERR4" Timeout or unavailable time (CR) 0x0d
"ERR5" Data length error (CR) 0x0d
"ERRA" Invalid password (CR) 0x0d
4bytes 1byte
Example 1: Query Power "QPW"
1. Connects to the projector.
IP = 192.168.0.8, Port number = 1024
2. Receives a response.
Response = "NTCONTROL 1 1aa6c14e" + (CR)
"1aa6c14e" = 8 bytes random characters
17
PT-DZ6710U / PT-DZ6710E / PT-DZ6700U / PT-DZ6700E / PT-DW6300US / PT-DW6300ES / PT-D6000US / PT-D6000ES