10.3. Removal of A-P.C.Board
(1) Remove the upper case according to the section 10.2. "Removal
of Upper Case".
(2) Unscrew the 3 screws and remove the terminal cover.
(3) Unscrew the 6 screws and remove the A-P.C.Board block.
(4) Unscrew the 3 screws and remove the WL-P.C.Board.
Note:
·
The WL-P.C.Board is connected onto the A-P.C.Board
with the connector. Work carefully when removing it.
(5) Disconnect the flexible cable and connectors (only for PT-
DZ6710*) between the A-P.C.Board and J*-P.C.Board (PT-
DZ6710*: J2-P.C.Board, Other models: J-P.C.Board).
(6) Unscrew the screws (PT-DZ6710*: 11, Other models: 10) and
remove the A-P.C.Board.
27
PT-DZ6710U / PT-DZ6710E / PT-DZ6700U / PT-DZ6700E / PT-DW6300US / PT-DW6300ES / PT-D6000US / PT-D6000ES
To Next Page
Loading...
