(6) Unscrew the 2 screws and remove the mechanical shutter.
Note:
·
Be careful not to damage the shutter when removing it.
10.21. Removal of Liquid Cooling Module
(1) Separate the DMD block and the pump (liquid cooling module)
according to the steps 1 through 5 in the section 10.20. "Removal
of DMD Block".
(2) Unscrew the 4 screws and remove the ACF drive unit.
(3) Unscrew the 2 screws and release the tank.
(4) Remove the liquid cooling module (Pump, Tank and Radiator)
39
PT-DZ6710U / PT-DZ6710E / PT-DZ6700U / PT-DZ6700E / PT-DW6300US / PT-DW6300ES / PT-D6000US / PT-D6000ES
To Next Page
Loading...
