Error Response
Error Message End character
"ERR1" Command format error (CR) 0x0d
"ERR2" Out of parameter (CR) 0x0d
"ERR3" Busy or unavailable time (CR) 0x0d
"ERR4" Timeout or unavailable time (CR) 0x0d
"ERR5" Data length error (CR) 0x0d
"ERRA" Invalid password (CR) 0x0d
4bytes 1byte
Example 1: Query Power "QPW"
1. Connects to the projector.
IP = 192.168.0.8, Port number = 1024
2. Receives a response.
Response = "NTCONTROL 0" + (CR)
3. Transmits the command.
Transmission data = "00QPW" + (CR)
4. Receives a response.
Reception data = "00000" + (CR)
5. Disconnects the connection with the projector.
Example 2: Query FILTER INFORMATION - RUNTIME "QFI:0"
1. Connects to the projector.
IP = 192.168.0.8, Port number = 1024
2. Receives a response.
Response = "NTCONTROL 0" + (CR)
3. Transmits the command.
Transmission data = "00QFI:0" + (CR)
4. Receives a response.
Reception data = "00 (SP) (SP) 142" + (CR)
5. Disconnects the connection with the projector.
5.3. Control commands
19
PT-DZ6710U / PT-DZ6710E / PT-DZ6700U / PT-DZ6700E / PT-DW6300US / PT-DW6300ES / PT-D6000US / PT-D6000ES
To Next Page
Loading...
