10.13. Removal of Power Module
(1) Remove the A-P.C.Board block according to the steps 1 through
3 in the section 10.3. "Removal of A-P.C.Board".
(2) Unscrew the 2 screws and remove the power fan.
(3) Unscrew the 7 screws and remove the power module block.
(4) Unscrew the 2 screws, remove the AC POWER cover and AC IN
terminal block.
10.14. Removal of Lamp Unit
(1) Loosen the 1 screw until it idles, then remove the lamp unit cover.
(2) Loosen the 3 screws until they idle, hold the handles and pull the
lamp unit out from the main unit.
33
PT-DZ6710U / PT-DZ6710E / PT-DZ6700U / PT-DZ6700E / PT-DW6300US / PT-DW6300ES / PT-D6000US / PT-D6000ES
To Next Page
Loading...
