Panasonic PT-DZ780

Chapter 4 Settings — Menu navigation
ENGLISH - 73
Main menu item Page
[PROJECTOR SETUP] 111
[P IN P] 128
[TEST PATTERN] 130
[SIGNAL LIST] 131
[SECURITY] 134
[NETWORK] 138
Sub-menu
The sub-menu of the selected main menu item is displayed, and you can set and adjust items in the sub-menu.
[PICTURE]
Sub-menu item Factory default Page
[PICTURE MODE] [STANDARD]
*1
76
[CONTRAST] [0] 76
[BRIGHTNESS] [0] 76
[COLOR] [0] 77
[TINT] [0] 77
[COLOR TEMPERATURE] [DEFAULT] 77
[WHITE GAIN] [+10] 79
[GAMMA] [DEFAULT] 79
[SYSTEM DAYLIGHT VIEW] [OFF] 80
[SHARPNESS] [+6] 80
[NOISE REDUCTION] [OFF] 80
[AI] [ON] 81
[SYSTEM SELECTOR] [YP
B
P
R
]
*1
81
*1 Depends on the signal input.
Note
f The factory default settings may vary depending on the picture mode.
[POSITION]
Sub-menu item Factory default Page
[SHIFT] ― 83
[ASPECT] [DEFAULT]
*1
83
[ZOOM] ― 84
[CLOCK PHASE] [0]
*1
85
[GEOMETRY] [OFF] 85
*1 Depends on the signal input.
[ADVANCED MENU]
Sub-menu item Factory default Page
[DIGITAL CINEMA REALITY] [AUTO]
*1
88
[BLANKING] ― 88
[INPUT RESOLUTION] ― 89
[CLAMP POSITION] [24]
*1
89
[EDGE BLENDING] [OFF] 90