Chapter 6 Appendix — Precautions for attaching the Ceiling Mount Bracket
194 - ENGLISH
Precautions for attaching the Ceiling Mount Bracket
f When installing the projector to the ceiling, be sure to use the optional Ceiling Mount Bracket (Model No.:
ET-PKD120H (for high ceilings), ET-PKD120S (for low ceilings), ET-PKD130H (for High Ceilings, 6-axis
Adjustment), ET-PKD130B (Projector Mount Bracket)) specied by Panasonic. The Ceiling Mount Bracket
(Model No.: ET-PKD120H (for high ceilings), ET-PKD120S (for low ceilings), ET-PKD130H (for High Ceilings,
6-axis Adjustment)) is used in combination with the Ceiling Mount Bracket (Model No.: ET-PKD130B (Projector
Mount Bracket)).
f When installing the projector, attach the drop-prevention set that comes with the ceiling mount bracket to the
projector. When the drop-prevention kit (Service Model No.: TTRA0214) is necessary, consult your dealer.
f Ask a qualied technician to do the installation work such as mounting the projector on the ceiling.
f Panasonic takes no responsibility for any damage to the projector resulting from use of a ceiling mount bracket
not manufactured by Panasonic or the inappropriate choice of location for installation, even if the warranty
period of the projector has not expired.
f Unused products must be removed promptly by a qualied technician.
f Use a torque screwdriver or Allen torque wrench to tighten bolts to their specied tightening torques. Do not use
electric screwdrivers or impact screwdrivers.
f Read the Installation Instructions for the ceiling mount bracket for details.
f The model numbers of accessories and optional accessories are subject to change without prior notice.
M6
Bottom view
Model No. of Ceiling Mount Bracket: ET-PKD120H (for high ceilings)
ET-PKD120S (for low ceilings)
12 mm (15/32")
Torque: (M6) 4 ± 0.5 N·m
ET-PKD130H (for High Ceilings, 6-axis Adjustment)
ET-PKD130B (Projector Mount Bracket)
To Next Page
Loading...
