Panasonic PT-EZ770T

DIS-4
SECTION 2 DISASSEMBLY PROCEDURES
2. Mechanical and Electrical Parts Disassembly
2.1. Disassembly flow chart
*BeforeDisassemblytheprojector,turnoffthePOWERswitchanddisconnectthepowerplugfromthewalloutlet.
* To assemble, reverse the disassembly procedures.
* When tore off sticky tapes, please use a new thing without reusing it on the occasion of assembling.
2.12. Power box removal
2.15. Panel fans removal
2.13. Filter house removal
2.14. Intake duct assy removal
Cable reforming
2.12. Fans (FN906, FN909, FN910) removal
2.11. [S]-P.C.Board assy removal
2.10. Lamp house, thermal fuse removal
2.9. Exhaust and lamp fans removal
2.8. Lighting assy removal
2.7. Front cover removal
2.6. [V]-P.C.Board, [A]/[J]-P.C.Board assy removal
2.5. Top cover removal
2.4. Lamp and lamp cover removal
2.2. Projection lens removal
2.3. Air filter, filter cover removal
Completed Product