Panasonic PT-EZ770T

ADJ-11
SECTION 3 ADJUSTMENTS
2. Software Update Procedure
* The projector supports software updating methods below:
  •UpdatingthesoftwareviaLANterminal:Main/Sub/Networksoftware
  •Updatingthesoftwareviaserialterminal:Main/Sub/DIGITALLINKsoftware
2. 1. Update by the LAN terminal
connection (Main/sub/net-
work software updating)
2. 1. 1. Equipment to be used
1. Computer : Use it for the transfer of software.
2. Communication cable : LAN cable. (When con-
necting directly, use a cross cable)
3.ServiceSoftware:[Main/Sub/Network/Format-
ter Update Tool.exe] Service software can be
downloaded from the projector service homep-
age.
4. Microprocessor software: Please download the
file from the projector service homepage to your
PC.
2. 1. 2. Connection Preparations
1.Setthe"DIGITALLINKMODE"oftheNETWORKmenuofprojectorto[AUTO]or[ETHERNET].
2. Confirm the network IP address of the projector and take a note.
3. Set the IP address of computer to the same IP address group of the projector.
Note:
Set up your computer not to turn in the standby or shutdown during the software updating.
2. 1. 3. Update procedure
1.Settheprojectorto"Normal-Standby"mode(POWERindicatorisLightinginred).
2.Startupservicesoftwarewithacomputer,selectModel,andthenclickthe[OK]button.
3. Select "LAN" in "Connection" and input the IP address of the projector, and click [Connection Check] button.
Computer
Projector
LAN cable (straight)
LAN cable (straight)
Hub