Panasonic PT-EZ770T

DIS-21
SECTION 2 DISASSEMBLY PROCEDURES
Relaylens1
Relaylens3
Relaylens2*
Dichroic mirror
(G)
Dichroic mirror
Mirror(R)
Mirror (B)
Fieldlens(B)
Condenserlens2(G)
Condenser lens2 (B)
Condenser lens *
Mirror(R)
Coated side comes
reectionside
Coated side comes
reectionside
Marking comes this
side up
Marking comes this
side up
3.6. Parts location and direction in the lighting case
When mounting or assembling the parts in the lighting case, the parts must be mounted in the speci-
fied location and direction as shown in the figure below.
Note: The parts indicated with (*) are mounted by adhesive, therefore, they cannot be replaced
individually.
Fieldlens(G)