DIS-5
SECTION 2 DISASSEMBLY PROCEDURES
2.2. Projection lens removal
1. Press and hold the lens release button and turn the projection lens counterclockwise gently to
the end and take it out.
Projection lens
Lens release button
Redpointmarker
Attaching the lens
1. Align the red mark on the Projection Lens with the red mark on the
projector, and insert the Projection Lens as far as possible.
2. Turn clockwise to the end.
Note:
Do not press the lens release button when attaching
the lens.
To Next Page
Loading...
