Panasonic PT-EZ770T

ADJ-14
SECTION 3 ADJUSTMENTS
2. 2. Update by the serial terminal connection (Main/sub/DIGITAL LINK software
updating)
2. 2. 1. Equipment to be used
1. Computer : Use it for the transfer of software.
2.Communicationcable:D-sub9oin(male/femaleRS-
232C straight)
3.ServiceSoftware:[Main/Sub/Network/FormatterUp-
date Tool.exe] Service software can be downloaded
from the projector service homepage.
4. Microprocessor software: Please download the file
from the projector service homepage to your PC.
2. 2. 2. Connection Preparations
1.Setthe"RS232C"ofthe"PROJECTORSETUP"
menuto"PROJECTOR".
2. Confirm the "Projector's ID", "Baudrate" and "Parity" and take a note.
3. Connect the serial cable.
Note:
Set up your computer not to turn in the standby or shutdown during the software updating.
2. 2. 3. Update procedure
1.Settheprojectorto"Normal-Standby"mode(POWERindicatorisLightinginred).
2.Startupservicesoftwarewithacomputer,selectModel,andthenclickthe[OK]button.
3. Select "Serial" in "Connection" and input the ID, Port, Baudrate, and click [Connection Check] button.
Computer
Projector
Serial cable