Panasonic PT-EZ770T

ADJ-16
SECTION 3 ADJUSTMENTS
8.Click[OK]buttontostartupdatingifthesoftwareversionisright.
9.Afterfinishingtheupdating,theconformationwindowwillappear.Clickthe[OK]buttontoclosethewindow.
10. Click the [EXIT] button to quit the application
Afterfinishingtheupdating,turnthePOWERswitchoffandon,andthenturntheprojectoron.
Confirm whether the version of the Microprocessor Software is updated definitely with sub menu " STATUS" of the main menu
"PROJECTORSETUP".
During updating, the progress window will appear and
the LED indicators on the projector will light as the
below;
*Main:LAMPandTEMPindicatorsashinredalter-
nately.
*Sub:POWERindicatoriso󰀨,LAMPandTEMPindica-
tors light in red
*Network:LAMPandTEMPindicatorsashinredalter-
nately
* If the version of the software is the
same, its updating will be skipped.