Panasonic PT-MZ10K

Chapter 4 Settings — [PROJECTOR SETUP] menu
134 - ENGLISH
[SECONDARY INPUT]
Set the secondary input switching function that will automatically switch to the specied input when the input
signal of projecting image is discontinued.
1) Press as to select [NO SIGNAL SETTING].
2) Press the <ENTER> button.
f The [NO SIGNAL SETTING] screen is displayed.
3) Press as to select [SECONDARY INPUT].
4) Press the <ENTER> button.
f The [SECONDARY INPUT] screen is displayed.
5) Press as to select the input to be specified as the switching destination, and press the <ENTER>
button.
[OFF] Disables the secondary input switching function.
[HDMI] Sets the secondary input to HDMI.
[DVI-D] Sets the secondary input to DVI-D.
[SDI] Sets the secondary input to SDI.
[RGB] Sets the secondary input to RGB.
[DIGITAL LINK] Sets the secondary input to DIGITAL LINK.
[BACK COLOR]
Set the display of the screen when a signal is not input.
1) Press as to select [NO SIGNAL SETTING].
2) Press the <ENTER> button.
f The [NO SIGNAL SETTING] screen is displayed.
3) Press as to select [BACK COLOR].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[BLUE] Displays blue in the entire screen.
[BLACK] Displays black in the entire screen.
[DEFAULT LOGO] Displays the Panasonic logo in the screen.
[USER LOGO] Displays the image registered by the user in the screen.
Note
f The [BACK COLOR] setting item is common with the following menu item.
g The [DISPLAY OPTION] menu → [BACK COLOR]
f To create and register the [USER LOGO] image, use “Logo Transfer Software”.
The software can be downloaded from the Panasonic website (https://panasonic.net/cns/projector/).
[NO SIGNAL LIGHTS-OUT]
This is a function to automatically turn off the light source of the projector when there is no input signal for specic
period. The time until the light source is turned off can be set.
1) Press as to select [NO SIGNAL SETTING].
2) Press the <ENTER> button.
f The [NO SIGNAL SETTING] screen is displayed.
3) Press as to select [NO SIGNAL LIGHTS-OUT].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[DISABLE] Disables the no signal lights-out function.