Panasonic PT-MZ10K

Chapter 6 Maintenance — [SELF TEST] indications
214 - ENGLISH
[SELF TEST] indications
[SELF TEST] can be checked in the [PROJECTOR SETUP] menu → [STATUS] → [SELF TEST].
The following list shows the alphanumeric symbol that is displayed when an error or a warning has occurred and
its details. Conrm “Action number”, and follow the measure in “Measure for error and warning” (x page 215).
The input supply voltage is displayed only with the numeric value.
Error/warning display Details Action number
F015 Luminance sensor error 5
F016 Angle sensor error 5
F018 Air pressure sensor error 5
F061 Light source 1 driver communication error 5
F062 Light source 2 driver communication error 5
F090 Wave plate error 5
F096 Lens mounter operation error 5
F111 Phosphor wheel error 5
F200 LCD panel red fan warning 5
F201 LCD panel green fan warning 5
F202 LCD panel blue fan warning 5
F203 PBS fan warning 5
F204 Radiator fan 1 warning 5
F205 Radiator fan 2 warning 5
F206 Phosphor fan warning 5
F207 Power source intake fan warning 4
F208 Power source exhaust 1 fan warning 4
F209 Power source exhaust 2 fan warning 4
F250 Liquid cooling pump warning 5
F300 LCD panel red fan error 5
F301 LCD panel green fan error 5
F302 LCD panel blue fan error 5
F303 PBS fan error 5
F304 Radiator fan 1 error 5
F305 Radiator fan 2 error 5
F306 Phosphor fan error 5
F307 Power supply intake fan error 5
F308 Power supply exhaust 1 fan error 5
F309 Power supply exhaust 2 fan error 5
F350 Liquid cooling pump error 5
F400 Light source 1 unit error 5
F401 Light source 2 unit error 5
F450 Light source 1 unit error 5
F451 Light source 2 unit error 5
F500 Light source 1 error 5
F501 Light source 2 error 5
H001 Battery replacement for the internal clock 4
H011 Intake air temperature sensor error 5
H012 Exhaust air temperature sensor error 5
H014 Light source temperature sensor 1 error 5
H015 Light source temperature sensor 2 error 5
H030 Lens temperature sensor error 5
H040 Clog sensor error 5
U081 Low AC power supply voltage warning (below 90 V) 3
U084 <DC OUT> terminal power supply error 6
U090 Lens not attached error 8
U200 Intake temperature warning 1
U201 Exhaust air temperature warning 2
U203 Light source 1 temperature warning 1
U204 Light source 2 temperature warning 1
U253 Power supply temperature warning 1