Panasonic PT-MZ10K

Chapter 5 Operations — Updating the rmware
ENGLISH - 199
Updating the rmware
The rmware of the projector can be updated via LAN.
Check the Panasonic website (https://panasonic.net/cns/projector/pass/) for availability of the rmware that can be
updated. Customer can update the rmware if a newer version than the current rmware version is published.
It is necessary to register and log in to PASS
*1
to conrm the availability of the rmware that can be updated or to
download the rmware.
*1 PASS: Panasonic Professional Display and Projector Technical Support Website
For details, visit the Panasonic website (https://panasonic.net/cns/projector/pass/).
r Firmware that can be updated
f Main version
f Sub version
r How to conrm the rmware version
Current rmware version can be conrmed by pressing the <STATUS> button on the remote control and
displaying the [STATUS] screen.
The rmware version can also be conrmed in the [PROJECTOR SETUP] menu → [STATUS].
10000h
10000h / 10000h
1/5
1.00 / 1.00
1h 23m
31°C/87°F
31°C/87°F
31°C/87°F
31°C/87°F
123456789012
Sub version
Main version
MENU
EXITCHANGE
ENTER
SEND E-MAIL
NO ERRORS
SELF TEST
LIGHT2 TEMP.
LIGHT1 TEMP.
EXHAUST AIR TEMP.
INTAKE AIR TEMP.
MAIN/SUB VERSION
CONTINUOUS LIGHTING TIME
LIGHT RUNTIME
PROJECTOR RUNTIME
SERIAL NUMBER
PROJECTOR TYPE
PT-MZ16K
STATUS
Note
f A LAN cable is required to connect to the network via wired LAN.
Updating the rmware via LAN
Example of general network connection
Computer
Projector
LAN cable (straight) LAN cable (straight)
Hub
Attention
f When a LAN cable is directly connected to the projector, the network connection must be made indoors.
Note
f A LAN cable is required to connect to the network via wired LAN.
f Connect a LAN cable to the <LAN> terminal or the <DIGITAL LINK> terminal of the projector.
f To connect to the network using the <LAN> terminal, set the [NETWORK] menu → [NETWORK CONTROL] → [TYPE SELECT] to [LAN] or
[LAN & DIGITAL LINK].