Chapter 1 Preparation — About your projector
ENGLISH - 29
Projector body
1
2 3 4 5
6 6
8
7
7
15
7
16
10
11
12
13
14 66
89
Front
Side
Rear
19
17
18
Projection direction
BottomTop
1 Remote control signal receiver (front)
2 Power indicator <ON (G)/STANDBY (R)>
Indicates the status of the power.
3 Light source indicator <LIGHT>
Indicates the status of the light source.
4 Temperature indicator <TEMP>
Indicates the internal temperature status.
5 Filter indicator <FILTER>
Indicates the status of the air lter unit.
6 Adjustable feet
Adjusts the projection angle.
7 Intake vent
8 Exhaust vent
9 Connecting terminals (x page 31)
10 <MAIN POWER> switch
Turns on/off the main power.
11 Power cord holder
Connect the supplied power cord.
13 Remote control signal receiver (rear)
14 Security slot
This security slot is compatible with the Kensington security
cables.
15 Control panel (x page 30)
16 Air lter cover
There is the air lter unit inside.
17 Top slide cover
There is the lens lock lever for mounting the projection lens
inside. (x page 43)
To Next Page
Loading...
