Chapter 5 Operations — Web control function
ENGLISH - 171
[Mail error log] page
Click [Status] → [Mail error log].
E-mail error log is displayed if periodic E-mail sending has failed.
Note
f [Access error log] and [Mail error log] display the recent few thousand accesses/requests. All information may not be displayed when many
accesses/requests are made at once.
f Logs in [Access error log] and [Mail error log] are deleted from the oldest when exceeding a certain amount.
f Check [Access error log] and [Mail error log] periodically.
[Basic control] page
Click [Projector control] → [Basic control].
1
2
3
4
6
5
1 [POWER]
Turns off/on the power.
2 [SHUTTER]
Switches whether to use the shutter function (enabled (shutter:
closed)/disabled (shutter: opened)).
3 [OSD]
Switches off (hide)/on (display) the on-screen display function.
4 [SYSTEM]
Switches the system method.
5 On-screen display of the projector
Displays the same items as shown on the on-screen display
of the projector. You can check or change the settings of the
menus. It is displayed even if the on-screen display function is
set to off (hide).
6 [INPUT SELECT]
Switches the input signal.
To Next Page
Loading...
