Panasonic PT-MZ10K

Chapter 5 Operations — Web control function
ENGLISH - 185
[User] account
1
2
3
1 [Account]
Displays the account to change.
2 [New]
[User name]:
Enter the desired new user name. (Up to 16 characters in single
byte)
[Password]:
Enter the desired new password. (Up to 16 characters in single
byte)
[Password(Retype)]:
Enter the desired new password again.
3 [Change]
Determines the change of password.
[Change password] (For user rights)
Only the change of password is enabled under the user rights.
1
2
4
3
1 [Old Password]
Enter the current password.
2 [New Password]
Enter the desired new password. (Up to 16 characters in single
byte)
3 [Retype]
Enter the desired new password again.
4 [Change]
Determines the change of password.
Note
f To change the account of the [Administrator], entry of [User name] and [Password] in [Current] is required.