Panasonic PT-MZ770

Chapter 5 Operations — Projecting with Panasonic APPLICATION input
180 - ENGLISH
Description of the standby screen
The standby screen differs depending on the setting in the [NETWORK/USB] menu → [WIRELESS LAN].
r When [WIRELESS LAN] is set to [SIMPLE]
1
4
5
2
3
1 Network ID/projector name
Displays the network ID of the projector and the projector name
set for this projector.
2 QR code
The connection information to connect to the projector using the
“Wireless Projector”.
3 Connection method
Displays the setting in the [NETWORK/USB] menu →
[WIRELESS LAN]. In this case, it is displayed as [SIMPLE].
4 [SSID]
Displays the SSID to be used.
5 [KEY]
Displays the key to be used.
It is normally displayed as *. Press the <AUTO SETUP/
CANCEL> button on the remote control or the <LENS/
CANCEL> button on the control panel to display the character
string.
Note
f The QR code is used when connecting to the projector using the “Wireless Projector”.
r When [WIRELESS LAN] is set to [SIMPLE]
1
2
1 Network ID/projector name
Displays the network ID of the projector and the projector name
set for this projector.
2 Connection method
Displays the setting in the [NETWORK/USB] menu →
[WIRELESS LAN]. In this case, it is displayed as [M-DIRECT]
or [USER].