To Next PageTo Next PageWhat to do if video from HDMI device does not appear on Panasonic PT-RZ11K Projector?
If video from an HDMI compatible device does not appear or appears jumbled on your Panasonic Projector, check if the HDMI cable is securely connected. Try turning the power of both the projector and the external device off and on. Also, ensure that the input signal is compatible with the projector.
What to do if Panasonic PT-RZ11K remote control does not respond?
If the remote control for your Panasonic Projector isn't responding, first ensure that the batteries aren't depleted and are inserted with the correct polarity. Check for obstructions between the remote and the projector's signal receiver, and make sure you're within the remote's effective range. Also, check if other light sources are interfering with the signal. Verify that the [REMOTE CONTROL] setting in [CONTROL DEVICE SETUP] is not set to [DISABLE] and confirm that the terminal is not being used for contact control. Ensure the ID number setting operation is correct.
Why no image appears on my Panasonic Projector?
If no image is appearing on your Panasonic Projector, check that all connections to external devices are correctly made and the input selection setting is correct. Ensure the [BRIGHTNESS] adjustment isn't at its minimum. Verify the external device connected to the projector is working properly and that the shutter function isn't in use. If the power indicator is blinking red, consult your dealer. Also, make sure the lens cover is removed from the lens.
How to fix Panasonic PT-RZ11K when power does not turn on?
If your Panasonic Projector isn't turning on, ensure the power plug is firmly inserted into the outlet. Check if the switch is set to . Verify that the wall outlet is supplying electricity and that the circuit breakers haven't tripped. Also, check if the light source indicators / or the temperature indicator are lighting or blinking.
Why is Panasonic PT-RZ11K image not displaying correctly?
If your Panasonic Projector's image isn't displaying correctly, first ensure that the [SYSTEM SELECTOR] selection is set correctly. Verify the [RGB1 INPUT SETTING] is also correctly configured. Check if there's an issue with the video tape or other image sources, and confirm that the input signal is compatible with the projector.
How to fix reversed left and right images on Panasonic PT-RZ11K Projector?
If the left and right images are reversed on your Panasonic Projector, first check the 3D eyewear settings to ensure they are synchronized. If the issue persists, change the [LEFT/RIGHT SWAP] setting in [3D SETTINGS].
What to do if Panasonic PT-RZ11K Projector buttons on the control panel do not operate?
If the buttons on your Panasonic Projector's control panel aren't working, check if the [CONTROL PANEL] setting in [CONTROL DEVICE SETUP] is set to [DISABLE]. Also, verify whether the terminal is being used for contact control.
Why Panasonic Projector menu screen does not appear?
If the menu screen does not appear on your Panasonic Projector, check if the on-screen display function is turned off (hidden).
What to do if no image appears on Panasonic Projector?
If your Panasonic Projector is not displaying an image, here are some things to check: * Make sure all connections to external devices are correctly connected. * Verify the input selection setting is correct. * Check that the BRIGHTNESS adjustment isn't at its minimum setting. * Confirm that the external device connected to the projector is working properly. * Ensure the shutter function is not in use. * Check if the lens cover is still attached to the lens. If the power indicator is blinking red, it is recommended to consult your dealer.
Why does Panasonic PT-RZ11K Projector remote control not respond?
If the remote control is not responding with your Panasonic Projector, consider the following: * Check if the batteries are depleted and replace them if necessary. * Ensure the batteries are inserted with the correct polarity. * Make sure there are no obstructions between the remote and the projector's signal receiver. * Verify the remote is within its effective operating range. * Check if other light sources, like fluorescent lights, are affecting the projection. * Confirm that the REMOTE CONTROL setting in CONTROL DEVICE SETUP is not set to DISABLE. * Check if the terminal is used for contact control. * Verify the ID number setting operation is correct.
General| Light Source | Laser |
|---|---|
| Contrast Ratio | 20, 000:1 |
| Brightness | 10, 000 lumens |
| Resolution | 1920x1200 (WUXGA) |
| Lamp Life | 20, 000 hours |
| Lens Shift | Vertical: ±60%, Horizontal: ±25 % |
| Input Terminals | HDMI, DVI-D, 3G-SDI |
| Output Terminals | HDMI, 3G-SDI, DVI-D |
| Control Terminals | RS-232C, LAN, USB |
| Noise Level | 39 dB |
| Light Source Life | 20, 000 hours |
