To Next PageTo Next PageWhy video from HDMI device does not appear on Panasonic PT-RZ11K Projector?
If video from an HDMI compatible device doesn't appear or appears jumbled on your Panasonic Projector: * Check that the HDMI cable is securely connected. * Try turning the power of both the projector and the external device off and on again. * Ensure that the input signal is compatible with the projector.
What to do if Panasonic PT-RZ11K Projector image does not display correctly?
If the image on your Panasonic Projector is not displaying correctly: * Ensure the SYSTEM SELECTOR is set correctly. * Verify the RGB1 INPUT SETTING is properly configured. * Check the video tape or other image sources for issues. * Confirm that the input signal is compatible with the projector.
Why image from computer does not appear on Panasonic PT-RZ11K?
If you're not getting an image from a computer on your Panasonic Projector: * Check if the cable is too long. For D-Sub cables, it should be 10 m (32'10") or shorter. * Verify the external video output on the laptop is set correctly. (The external output settings may be switched by pressing the “Fn” + “F3” or “Fn” + “F10” simultaneously. Since the method varies depending on the computer type, refer to the user manual provided with your computer.)
Why image output from DVI-D does not appear on Panasonic PT-RZ11K?
If the image output from the DVI-D of your computer does not appear on the Panasonic Projector: * Verify that the [EDID SELECT] setting in [DVI-D IN] is set to [EDID3] or [EDID2:PC]. * Consider updating the graphics accelerator driver of the computer to the latest version. * Try making the [EDID SELECT] setting in [DVI-D IN] and then restarting the computer.
General| Light Source | Laser |
|---|---|
| Contrast Ratio | 20, 000:1 |
| Brightness | 10, 000 lumens |
| Resolution | 1920x1200 (WUXGA) |
| Lamp Life | 20, 000 hours |
| Lens Shift | Vertical: ±60%, Horizontal: ±25 % |
| Input Terminals | HDMI, DVI-D, 3G-SDI |
| Output Terminals | HDMI, 3G-SDI, DVI-D |
| Control Terminals | RS-232C, LAN, USB |
| Noise Level | 39 dB |
| Light Source Life | 20, 000 hours |
