Panasonic PT-RZ690

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 123
4) Press
qw
to adjust the level.
Item Operation Adjustment Range of adjustment
[VERTICAL]
Press
w
.
The lower-side color becomes
pale, or the upper-side color
becomes dark.
- 127 - +127
Press
q
.
The upper-side color becomes
pale, or the lower-side color
becomes dark.
[HORIZONTAL]
Press
w
.
The left-side color becomes pale,
or the right-side color becomes
dark.
Press
q
.
The right-side color becomes
pale, or the left-side color
becomes dark.
Setting [PC CORRECTION]
Set the [PC CORRECTION] function to correct the brightness and the color unevenness of the entire screen using
a computer and “Geometric & Setup Management Software”.
To use the [PC CORRECTION] function, the optional Upgrade Kit (Model No.: ET-UK20) is required. To purchase
the product, consult your dealer.
1) Press
as
to select [UNIFORMITY].
2) Press the <ENTER> button.
f
The
[UNIFORMITY]
screen is displayed.
3) Press
as
to select [PC CORRECTION].
4) Press
qw
to switch the item.
[OFF]
Does not perform correction using a computer and “Geometric & Setup Management Software”
*1
.
[ON]
Corrects the brightness and color unevenness of the entire screen using a computer and “Geometric
& Setup Management Software”
*1
.
*1 “Geometric & Setup Management Software” can be downloaded from the Panasonic website (https://panasonic.net/cns/projector/pass/). It is
necessary to register and login to PASS to download.
Note
f
The adjustment value for [UNIFORMITY] will not return to factory default even if the [PROJECTOR SETUP] menu
→
[INITIALIZE]
→
[ALL
USER DATA] is executed. The [PC CORRECTION] setting will return to [OFF] of the factory default.
[SHUTTER SETTING]
Set the operation of the shutter function.
Setting [FADE-IN] or [FADE-OUT]
Set the image fade-in and fade-out when the shutter function operates.
1) Press
as
to select [SHUTTER SETTING].
2) Press the <ENTER> button.
f
The
[SHUTTER SETTING]
screen is displayed.
3) Press
as
to select [FADE-IN] or [FADE-OUT].
4) Press
qw
to switch the item.
Item Adjustment
[FADE-IN]
[FADE-OUT]
[OFF]
Does not set fade-in or fade-out.
[0.5s] - [10.0s]
Sets the fade-in or fade-out time.
Select an item from [0.5s] - [4.0s], [5.0s], [7.0s], or [10.0s]. [0.5s] -
[4.0s] can be selected in increments of 0.5.