Chapter 4āSettings ā [PICTURE] menu
92 - ENGLISH
3) Press
as
to select [PICTURE MODE].
4) Press
qw
to set [REC709].
5) Press
as
to select [COLOR].
6) Press the <DEFAULT> button on the remote control to set the factory default setting.
7) Follow Steps 5) - 6) to set [TINT], [COLOR TEMPERATURE], [WHITE GAIN], [GAMMA], and [SYSTEM
DAYLIGHT VIEW] to the factory default settings.
Note
f
sRGB is available for RGB signal input only.
To Next Page
Loading...
