Panasonic PT-TW340

ENGLISH - 53
Operation Adjustment Adjustment range
Press the a button.
Increases the brightness of the dark (black) parts of the screen.
0 ~ +63
Press the s button.
Reduces the brightness of the dark (black) parts of the screen.
[Color]
(Except for computer signal input)
You can adjust the color saturation of the projected image.
1) Press as to select [Color].
2) Press the <ENTER> button.
3) Press as to adjust the level.
Operation Adjustment Adjustment range
Press the a button.
Deepens colors.
0 ~ +63
Press the s button.
Weakens colors.
[Tint]
(Only for HDMI signals/Component signals and NTSC/NTSC4.43 signals when input Video or S-video signals)
You can adjust the skin tone in the projected image.
1) Press as to select [Tint].
2) Press the <ENTER> button.
3) Press as to adjust the level.
Operation Adjustment Adjustment range
Press the a button.
Adjusts skin tone toward greenish color.
0 ~ +63
Press the s button.
Adjusts skin tone toward reddish purple.
[Color temp.]
You can switch the color temperature if the white areas of the projected image are bluish or reddish.
1) Press as to select [Color temp.].
2) Press the <ENTER> button.
3) Press as to switch the item.
f The items will switch each time you press the button.
[High]
Becomes a bluish image at [High]. Becomes a reddish image at [Low]. Selects the suitable natural
color.
[Mid]
[Low]
Note
f When computer signal input, if the [Display] menu → [System] is set to [PAL], [SECAM], [PAL-M], [PAL-N], [NTSC],
[NTSC4.43], [1080i], [1080p], [720p], [576p], [576i], [480p] or [480i], [Color temp.] will be unavailable.
[Red] / [Green] / [Blue]
You can adjust the white balance.
1) Press as to select [Red] / [Green] / [Blue].
2) Press the <ENTER> button.
3) Press as to adjust the level.
Menu Operation Adjustment Adjustment range
[Red]
Press the a button.
Deepen red tone.
0 ~ +63
Press the s button.
Lighten red tone.
Chapter 4 Settings - [Color adjust] menu