Panasonic PT-TW340 - [HDMI Setup]

58 - ENGLISH
Operation Adjustment Range
Press the a button.
Turns up the volume.
0 ~ +25
Press the s button.
Turns down the volume.
Setting the mute
1) Press as to select [Sound].
2) Press the <ENTER> button.
f The [Sound] screen is displayed.
3) Press as to select [Mute].
4) Press the <ENTER> button.
5) Press as to switch the item.
f The items will switch each time you press the button.
f You can also press the <MUTE> button on the remote control. (x page 42)
[On] Audio is not output.
[Off] Audio is output.
[HDMI Setup]
Switch the setting when the external equipment is connected to the <HDMI IN> terminal of the projector and the image is not
projected correctly. Or switch the setting of the audio input.
[Image]
1) Press as to select [HDMI Setup].
2) Press the <ENTER> button.
f The [HDMI Setup] screen is displayed.
3) Press as to select [Image].
4) Press the <ENTER> button.
5) Press as to switch the item.
f The items will switch each time you press the button.
[64-940]
Select when the HDMI terminal of an external device (such as a blu-ray player) is connected to the
<HDMI IN> terminal.
[0-1023]
Select when the DVI-D terminal output of an external device (such as a computer) is connected
to the <HDMI IN> terminal via a conversion cable or similar cable. Select also when the HDMI
terminal output of a computer or other device is connected to the <HDMI IN> terminal.
Note
f The optimal setting varies depending on the output setting of the connected external device. Refer to the operation
instruction of the external device regarding the output of the external device.
[Sound]
1) Press as to select [HDMI setup].
2) Press the <ENTER> button.
f The [HDMI setup] screen is displayed.
3) Press as to select [Sound].
4) Press the <ENTER> button.
5) Press as to switch the item.
f The items will switch each time you press the button.
[HDMI]
Select when the HDMI cable is connected, the image and audio are transmitted, and you do not
need to connect the audio signal separately.
[Computer]
Select when the DVI-D terminal output of an external device (such as a computer) is connected to
the <HDMI IN> terminal via a conversion cable or similar cable. The image will not be transmitted,
the audio signal is input to <AUDIO IN 1> terminal.
Chapter 4 Settings - [Setting] menu