Panasonic PT-TW340 - [Keystone]; [Store]

ENGLISH - 61
[Keystone]
You can correct the trapezoidal distortion that occurs when the projector is installed tilted or when the screen is tilted.
1) Press as to select [Keystone].
2) Press the <ENTER> button.
f The [Keystone] screen is displayed.
3) Press as to select one item.
[Keystone]
Sets whether or not to keep the keystone correction after turn off the projector or plug out
the power cord.
[V Keystone]
*1
Adjusts when vertical trapezoid of the projected image is distorted.
[H/V Keystone] Adjusts when the horizontal or vertical trapezoid of the projected image is distorted.
[Corner
correction ] Adjusts when the four corners of the projected image are distorted.
[Curved correction]
Adjusts when the linearity is not uniform or the vertical and horizontal lines are distorted.
[Reset value]
Return the corrected values to the factory default values.
*1 Only for PT-TX210.
[Keystone]
Sets whether or not to keep the keystone correction after turn off the projector or plug out the power cord.
1) Press as to select [Keystone].
2) Press the <ENTER> button.
f The [Keystone] screen is displayed.
3) Press as to select [Keystone].
4) Press the <ENTER> button.
5) Press as to switch the item.
f The items will switch each time you press the button.
[Reset]
When [Standby mode] is set to [Eco], plug out the power cord or turn off the projector, the
keystone correction will be canceled. When [Standby mode] is set to [Normal], plug out the power
cord, the keystone correction will be canceled; turn off the projector, the keystone correction will
be kept.
[Store] The keystone correction will be kept when plug out the power cord or turn off the projector.
[V Keystone]
(Only for PT-TX210)
1) Press as to select [Keystone].
2) Press the <ENTER> button.
f The [Keystone] screen is displayed.
3) Press as to select [V Keystone].
4) Press the <ENTER> button.
5) Press as to correct the keystone.
Operation Adjustment
Press the a button.
The top becomes smaller.
Press the s button.
The bottom becomes smaller.
[H/V Keystone]
(Only for PT-TW340, PT-TW250, PT-TX400 and PT-TX310)
1) Press as to select [Keystone].
Chapter 4 Settings - [Expand] menu