Panasonic PT-TW340 - Page 78

78 - ENGLISH
1 [Aspect]
Switches the aspect of the projected image.
2 [Fine sync]
Adjusts the ne sync of the projected image.
3 [H Position]
Adjusts the horizontal position of the projected image.
4 [V Position]
Adjusts the vertical position of the projected image.
5 [H.Size]
Adjusts the total number of dots of the projected
image.
6 [Freeze]
Switches the freeze function between on and off.
7 [Auto PC adj.]
Executes the Auto PC adj. function.
8 [V Keystone]
Corrects the keystone in vertical direction.
9 [H Keystone]
Corrects the keystone in horizontal direction.
10 [Curved correction]
Corrects the pincushion or barrel of the projected
image.
11 [Corner correction]
Corrects the four corners of the projected image.
[Network Setup] page
1
2
1 [LAN Setup]
Select [Obtain an IP address automatically] if you
want to enable the DHCP client.
[IP Address]
Enter the IP address when not using a DHCP server.
[Subnet]
Enter the subnet mask when not using a DHCP
server.
[Gateway]
Enter the default gateway address when not using a
DHCP server.
[DNS]
Enter the DNS server when not using a DHCP server.
Allowed characters: Numbers (0 - 9), period (.)
(Example: 192.168.0.253)
2 [Apply]
Updates the settings.
Chapter 4 Settings - Network control