82 - ENGLISH
Note
f The driver is not installed in your computer, and it will be removed from the computer when disconnected the USB cable.
f It will take a while when you want to project the computer screen.
f Connect a USB cable directly to the USB connector of a computer. It will not work when connect through a USB hub.
f The screen resolution of your computer will be switched as follows: PT-TW340 and PT-TW250: 1 280 x 800 (WXGA),
PT-TX400 and PT-TX310 : 1 024 x 768 (XGA).
Termination of the USB display
1) When terminate the USB display, remove the USB cable directly.
f There is no need to following “Remove hardware safely” when a USB cable is disconnected.
When using Mac OS
r Mac OS operating environment
OS Mac OS X 10.5, 10.6, 10.7
CPU Power PC G4 1GHz or faster
Amount of memory 512 MB or more
Hard-disk free space 20 MB or more
Display Resolution 640 x 480 or more, 1 600 x 1 200 or less
f There is no guarantee for all the computers that meet the above conditions will operate properly.
Projecting the USB display
1) Connect the <USB B (DISPLAY)> terminal of the projector to a computer with a USB cable.
2) Press the <MEMORY VIEWER/USB DISPLAY> button on the remote control or switch the input source
to [USB Display].
f You can also press the <INPUT/ENTER> button on the control panel and select the input source in the Input menu.
f The virtual disk which is named “USB Display” will be mounted on desktop.
3) Double-click “Monitor.app” in the virtual disk that has been mounted.
f The computer screen is projected.
4) Right-click the driver icon in the dock of computer and select one item in Pop-up menu.
f The item which is displayed in gray is unavailable.
[Active audio] / [Disable audio] Set whether to output the audio from the computer.
[Play video] / [Pause video] Switch between play and pause the image.
[Start] / [Stop]
Set whether to display the image from the computer.
[Options]
Set the items of “Keep in Dock”, “Open at Login” or “Show in Finder”.
[Show All Windows]
Display the background of computer on the full screen temporarily.
[Hide] / [Show]
Set whether to display the USB driver icon.
[Quit] Terminate the USB Display.
Note
f It will take a while when you want to project the computer screen.
f Connect a USB cable directly to the USB connector of a computer. It will not work when connect through a USB hub.
Termination of the USB display
1) When terminate the USB display, remove the USB cable directly.
Chapter 4 Settings - Using useful functions
To Next Page
Loading...
