To Next PageTo Next PageHow to fix pale or grayish color on Panasonic Projector?
If the color on your Panasonic Projector appears pale or grayish, check if the [COLOR] or [TINT] settings are adjusted correctly. Also, verify that the external device connected to the projector is adjusted correctly, and inspect the RGB signal cable for any damage.
Why is Panasonic PT-VMW51 Projector operation noise loud?
Loud operation noise in your Panasonic Projector can be caused by a high internal temperature, which increases the cooling fan speed automatically. Check if the ambient temperature is high, the air filter unit is dirty, or the intake/exhaust vent is blocked.
How to troubleshoot Panasonic PT-VMW51 Projector DIGITAL LINK input image or sound that is not output?
To troubleshoot DIGITAL LINK input issues on your Panasonic Projector, first verify that the cable is compatible with the projector's condition. Ensure the connections between the twisted-pair-cable transmitter and the projector or an external device are correctly done. Check if [DIGITAL LINK MODE] is set to [AUTO], [DIGITAL LINK], or [LONG REACH], and confirm it is not set to [ETHERNET]. Finally, ensure the signal input is compatible with the twisted-pair-cable transmitter.
How to fix no power supplied from terminal on Panasonic PT-VMW51 Projector?
To resolve the issue of no power being supplied from the terminal on your Panasonic Projector, check if the [PROJECTOR SETUP] menu ? [ECO MANAGEMENT] ? [STANDBY MODE] is set to [ECO]. Also, ensure that the external device connected to the terminal has not exceeded the rating (5 VDC, maximum 2 A).
General| Contrast Ratio | 10, 000:1 |
|---|---|
| Zoom Ratio | 1.6x |
| Keystone Correction | Vertical: ±30°, Horizontal: ±30° |
| Aspect Ratio | 16:10 |
| Projection Size | 30 - 300 inches |
| Resolution | WXGA (1280 x 800) |
| Light Source | Laser |
| Lens Shift | Horizontal: ±10% |
| Connectivity | HDMI, VGA, USB |
| Lamp Life | 20, 000 hours |
| Video Modes | 480i, 480p, 576i, 576p, 720p, 1080i, 1080p |
| Speakers | 10W |
Covers electrical safety, environmental hazards, and unit opening precautions.
Addresses warnings related to laser beam exposure and object placement in front of the lens.
Details FCC, Canadian ICES, and grounding plug safety requirements.
Covers electrical safety, installation environment, ventilation, and placement guidelines.
Provides a step-by-step guide for setting up and connecting the projector.
Covers general safety, transport, and installation precautions for the projector.
Explains different installation modes and the projector's angle sensor functionality.
Offers examples and instructions for connecting AV equipment, computers, and DIGITAL LINK devices.
Covers power connection, indicators, and the procedure for turning the projector on and off.
Guides through the initial setup process, language selection, and basic image adjustments.
Explains how to select input sources for projection using the remote control and panel.
Details the various settings available within the PICTURE menu for image quality enhancement.
Covers settings within the POSITION menu for image placement and distortion correction.
Details settings for projector status, ID assignment, and startup behavior.
Describes ECO management functions, light power settings, and power management modes.
Details security features like password protection, menu locking, and device control limitations.
Covers Ethernet type, Digital Link, wired/wireless LAN setup, and network security settings.
Explains using USB memory for image projection, including file compatibility and cautions.
Covers projecting images via network and the process of connecting external devices.
Explains the meaning of indicator lights and basic troubleshooting steps.
Offers a table of common problems and their solutions with page references.
