To Next PageTo Next PageWhy Panasonic PT-VW431DEA Projector has no sound output from a HDMI device?
If there is no sound output from a HDMI device connected to your Panasonic Projector, set the sound channel of the attached device to Linear PCM. If that doesn't work and no audio signal is output during HDMI cable connection, connect the audio cable to the COMPUTER AUDIO IN 2 terminal and set to "Computer 2" in the "Sound" section of the "Setting" menu.
What does it mean if exclamation mark appears on the screen of Panasonic PT-VW431DEA Projector?
If an exclamation mark appears on the screen of your Panasonic Projector, it means your operation is invalid. Operate correctly.
What to do if Panasonic PT-VW431DEA image is distorted or runs off?
Check [PC adj.] or [Screen] and adjust them.
What to do if Panasonic PT-VW431DEA Projector has no picture or sound output from DIGITAL LINK input?
If there is no picture or sound output from the DIGITAL LINK input on your Panasonic Projector, securely connect the cables between the Twisted pair cable Extender and the image (output) devices or between the Twisted pair cable Extender and the projector. Also, confirm that the [DIGITAL LINK mode] is set to [Auto] or [DIGITAL LINK] other than [Ethernet].
What does '[Service]' on the top left of Panasonic PT-VW431DEA screen mean?
If '[Service]' appears in the top left of the screen of your Panasonic Projector, it indicates a detected abnormal state inside the projector. Unplug the power cord and contact your dealer for maintenance.
General| Resolution | WXGA (1280 x 800) |
|---|---|
| Contrast Ratio | 10, 000:1 |
| Display Technology | LCD |
| Projection Size | 30 - 300 inches |
| Power Consumption (Normal Mode) | 320 W |
| Power Consumption (Standby) | 0.5 W |
| Speakers | 10W mono |
