Panasonic PT-VX41E - Setting up; Projection Methods and Parts

ENGLISH -
19
Getting Started
Setting up
Projection method
You can use the projector with any of the following 4 projection methods. To set the desired method in the projector.
J
Setting on a desk/oor and
projecting forward
J
Mounting on the ceiling and
projecting forward
Menu setting
*
1
Ceiling Off
Rear Off
Menu setting
*
1
Ceiling On
Rear Off
J
Mounting on the ceiling and
projecting from rear
(Using translucent screen)
J
Setting on a desk/oor and
projecting from rear
(Using translucent screen)
Menu setting
*
1
Ceiling On
Rear On
Menu setting
*
1
Ceiling Off
Rear On
For details about the menu setting, please refer to the [Screen] menu → [Ceiling] and [Rear]. *1 :
(
Æ
page
47)
Parts for ceiling mount (Optional)
You can install the projector on the ceiling by using the optional ceiling mount bracket (ET-PKV100H: for high
ceiling, ET-PKV100S: for low ceiling), and the optional projector mount base ET-PKV100B.
Use only the ceiling mount brackets specied for this projector.
z
Refer to the installation manual for the ceiling mount bracket when you install the bracket and the projector.
z
Attention
To ensure projector performance and security, installation of the ceiling mount bracket must be carried by your
z
dealer or a qualied technician.