Panasonic PT-VX41E - Video Delay Control; Filter Counter; Total Power Savings; Warning Log

Setting
ENGLISH -
55
Settings
Video delay control
This function allows you to make a digital processing
of a projected image faster.
Press ▲▼ to select [Video delay 1 )
control] and then Press the <SELECT>
button.
Press ▲▼ to select one item between 2 )
[On] and [Off].
Note
[Noise reduction] and [Progressive] can not be
z
selected when [Video delay control] function is set
to [On].
Filter counter
This function is used to set a frequency for the lter
replacement.
Press ▲▼ to select [Filter counter].1 )
Press ►or the <SELECT> button to 2 )
access the submenu items.
Filter counter
J
Show the total accumulated time of the lter use timer
setting.
Timer
J
To set a timer. When the projector reaches the
selected time the lter warning icon appears on the
screen.
Press ▲▼ to select [Timer] and then 1 )
press the <SELECT> button.
Press ▲▼ to set the Timer.2 )
Select from [Off/1000 H/2000 H/3000 H/4000
z
H/5000 H/6000 H] depending on the use
environment.
Filter counter reset
J
After replacing the lter, be sure to reset the timer.
Press ▲▼ to select [Filter counter 1 )
reset].
Press the <SELECT> button. 2 )
[Filter counter Reset?] appears. Select [Yes]
z
to continue. Another conrmation dialog
box appears, select [Yes] to reset the [Filter
counter].
Total power savings
This function displays the saved amount of power and
the exhausted CO2 of the projector.
Press ▲▼ to select [Total power 1 )
savings] and then press the <SELECT>
button.
Show the total accumulated power savings of
z
the projector and display the total amount of
CO2 exhausted from the projector.
Press the <SELECT> button to reset 2 )
the gures of the total power savings
and the exhausted
CO2.
[Total power savings Reset?] appears. Select
z
[Yes] to continue. Another conrmation dialog
box appears, select [Yes] to reset the [Total
power savings].
Warning log
This function records anomalous operations while the
projector is in operation and use it when diagnosing
faults.
Press ▲▼ to select [Warning log].1 )
Press ► or the <SELECT> button to 2 )
display the latest warning message.
Up to 10 warning logs are displayed with the
z
latest warning message at the top of the list,
followed by previous warning messages in
chronological order.
Note
When the [Factory default] function is executed, all
z
the warning log records will be deleted.
Factory default
This function returns all setting values except for [PIN
code lock], [Logo PIN code lock], [Lamp power], [Filter
counter] and [Total power savings] to the factory
default settings.
Press ▲▼ to select [Factory default].1 )
Press the <SELECT> button.2 )
[Return to Factory default?] appears. Select
z
[Yes] to continue. Another conrmation dialog
box appears, select [Yes] to return to [Factory
default].