Panasonic PT-VX41E

Network
58
- ENGLISH
Settings
Network control
Set when you want to control the projector from a
computer connected to the network.
Press ▲▼ to select [Network control].1 )
Press <SELECT> button to select [On] 2 )
or [Off] with the ▲▼ buttons.
Network status
This function shows the LAN setting environment of
the currently selected projector.
Press ▲▼ to select [Network status].1 )
Press <SELECT> button or the ► 2 )
button to show the information of the
current projector status.
AMX D.D.
This function allows the projector to be detected by
AMX Device Discovery. For more details, visit http://
www.amx.com/.
Press ▲▼ to select 1 ) [AMX D.D.].
Press <SELECT>2 ) button to select [On]
or [Off] with the ▲▼ buttons.
Network factory default
You can reset the network setting to the factory
default of the projector.
Press ▲▼ to select [Network factory 1 )
default], and press <SELECT> button.
A conrmation box appears and 2 )
select [Yes] and then press <SELECT>
button. Another conrmation box
appears and select [Yes] and then
press <SELECT> button.