Panasonic PT-VX42Z

f The items will switch each time you press the button.
[SXGA]
Normal setting.
[SXGA +]
Set this when the edge of the image is cropped.
[P-TIMER]
Set and operate the presentation timer function.
1) Press as to select [P-TIMER].
2) Press the <ENTER> button.
f The [P-TIMER] screen is displayed.
[MODE]
Switches the elapsed time between [COUNT UP] and [COUNT DOWN].
[TIMER]
Sets the nish time of timer when [COUNT DOWN] is selected.
[START] / [STOP] /
[RESTART]
Operates the timer.
[RESET]
Resets the count.
[EXIT]
[P-TIMER] is nished.
Setting [MODE]
1) Press as to select [MODE].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[COUNT UP]
Displays the elapsed time from count started.
[COUNT DOWN]
Displays the remaining time for the time set in [TIMER] menu.
Setting the countdown timer
1) Press as to select [TIMER].
2) Press qw to set the timer.
f The timer can be set from 1 to 180 minutes in 1 increment.
f The factory default setting is 10 minutes.
Note
f [TIMER] is available only when [MODE] is set to [COUNT DOWN].
The operation of [P-TIMER]
1) Press as to select one item.
[START]
Starts counting.
[STOP]
Stops counting.
[RESTART]
Restarts counting.
[RESET]
The count is reset.
2) Press the <ENTER> button.
f When you select [START] or [RESTART], the remaining time or the elapsed time will be displayed in the lower right of
the projected image.
f When you select [STOP], the remaining time or the elapsed time while stopping the counting will be displayed in the
lower right of the projected image.
f When [RESET] is selected, then go to step 3).
3) Press the <MENU> button 3 times and then the menu screen will disappear.
f The P-TIMER function is cancelled.
Note
f You can also use the P-TIMER function by pressing the <P-TIMER> button on the remote control (Æpage 52).
f If the elapsed time or remaining time is displaying, the text will not be displayed even when the [SECURITY] menu → [TEXT
DISPLAY] (Æ page 83) is set to [ON].
f The elapsed time or remaining time will not be displayed when the Menu screen is displaying.
f The start time will be "000:00" when [MODE] is set to [COUNT UP].
f The start time will change to the time which is set in [TIMER] when [MODE] is set to [COUNT DOWN].
f The circle gauge for [COUNT UP] is rotated clockwise, the circle gauge for [COUNT DOWN] is rotated counter-clockwise.
72 - ENGLISH
Chapter 4 Settings - [DISPLAY OPTION] menu