f The [AUDIO SETTING] screen is displayed.
3) Press as to select one item of [AUDIO IN SELECT].
[COMPUTER1]
Set the audio output when [COMPUTER1] input is selected.
[COMPUTER2]
Set the audio output when [COMPUTER2] input is selected.
[VIDEO]
Set the audio output when [VIDEO] input is selected.
[HDMI1]
Set the audio output when [HDMI1] input is selected.
[HDMI2]
Set the audio output when [HDMI2] input is selected.
4) Press qw to switch the item.
f The sub items will switch each time you press the button.
[COMPUTER1]
Select one item among [AUDIO IN 1], [AUDIO IN 2] or [AUDIO IN 3].
[COMPUTER2]
Select one item among [AUDIO IN 1], [AUDIO IN 2] or [AUDIO IN 3].
[VIDEO]
Select one item among [AUDIO IN 1], [AUDIO IN 2] or [AUDIO IN 3].
[HDMI1]
Select one item among [HDMI1 AUDIO IN], [AUDIO IN 1], [AUDIO IN 2] or [AUDIO IN 3].
[HDMI2]
Select one item among [HDMI2 AUDIO IN], [AUDIO IN 1], [AUDIO IN 2] or [AUDIO IN 3].
Note
f When [MIC] is set to [ON], [AUDIO IN 2] cannot be selected.
f Even if [AUDIO IN 2] is selected, it will change to [AUDIO IN 1] automatically when [MIC] is set to [ON].
Using MIC function
1) Press as to select [AUDIO SETTING].
2) Press the <ENTER> button.
f The [AUDIO SETTING] screen is displayed.
3) Press as to select [MIC].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
Disables the MIC.
[ON]
<AUDIO IN 2> terminal switch to MIC input.
5) Press as to select [MIC GAIN].
6) Press qw to adjust the level.
Operation Adjustment Range
Press the w button.
Turns up the MIC mixing gain.
0 ~ +63
Press the q button.
Turns down the MIC mixing gain.
Note
f When [OFF] is selected in [MIC], the [MIC GAIN] is not available.
f If the [MIC] is set to [ON] when connecting audio signals to the <AUDIO IN 2 (MIC IN)> terminal, loud sound may be output
suddenly depending on the setting value of [MIC GAIN].
f When [MIC] is set to [ON], no signal is input, AV MUTE function is on, FREEZE function is on or the POWER
MANAGEMENT function is working, the audio of MIC will be output.
[TEST PATTERN]
Displays the test pattern built-in to the projector.
Settings of position, size, and other factors will not be reected in test patterns. Make sure to display the input signal before
performing various adjustments.
1) Press as to select [TEST PATTERN].
2) Press the <ENTER> button.
f The test pattern with the [PATTERN CHANGE] individual adjustment screen is displayed.
3) Press qw to switch the item.
f The items will switch each time you press the button.
All white → Color bars (vertical) → Color bars (horizontal) → White cross on the black background → Black cross on
the white background → Cross hatch → All white →...
f When you press the <MENU> button or <RETURN> button, it will exit the test pattern and return to the sub menu of
[PROJECT SETUP].
Chapter 4 Settings - [PROJECTOR SETUP] menu
ENGLISH
-
75
To Next Page
Loading...
